PIRAT Sloop V3 5″ FPV Drone Frame

product-image

PIRAT Sloop V3 5″ FPV Drone Frame

100.00

Out of stock

100.00

Availability: Hết hàng SKU: Frames-Pirat Frames-42633608462512 Từ khóa: , , , ,

Mô tả

Developed in collaboration with FPV Pilot J-True, here comes the third version of the Pirat Sloop frame! Developed to be “smooth as hell” and capable of cinematic or juicy freestyle flight. The frame features our special cross plate mounting system which increases stiffness, reduces frame resonance, and prevents breaks. It features 20x20mm mounting holes in the rear for mounting of a Caddx Vista air unit or an analog video system.

We craft from strong as f#% materials! The frame of course is made from Chamfered Full 3K T300 carbon fiber, uses custom made 12.9 steel torx screws and, 7075 aluminum spacers. The Sloop V3 focuses on excellent CG balance by letting you choose between a “True X” or “Squashed X” arm layout to give a silky smooth flight feel. J-True personally recommends the Squashed X layout. Your going to fall in love with it!

Check out our 5″ Frames and the rest of our Pirat Frames Collection!

Features

  • Choose between TrueX and Squished geometries with the same set of arms
  • Uses the same arms as the Hook V2 Pirat frame
  • 5mm Arms and 2.5mm Bottom/top Plate thickness
  • Works with 22mm FPV video camera
  • Allows 27mm Maximum Stack Height
  • 7075 T6 Aluminum Custom Standoff
  • Full T10 Torx 12.9 Steel Screw Set
  • Chamfered Full 3K T300 Carbon
  • 30×30 Mounting Pattern in the front and 20×20 mounting in the rear
  • Compatible with analog VTx and Vista only

 

TORX SCREWS RULE
Get ready to say goodbye to stripped hex screws! Once you try torx, you’ll never go back. All Pirat frames are delivered with full T10 Torx screw sets and a Torx key.

ONE ARM TO RULE THEM ALL
Choose your geometry between Squished or TrueX arm layout with the same arm set. PDEVX highly recommends the TrueX layout. The Hook and the Sloop V3 frames even share the same arms!

STRONG HARDWARE
Crafted from strong materials with custom-made screws & aluminum parts. (12.9 steel, 7075 aluminum & T300 carbon)

REINFORCED CROSS PLATE

Our special cross plate mounting strengthens the whole body, increasing the stiffness and preventing breaks. 

CLASSIC BUS, PERFECTLY BALANCED
We worked hard to find the right balance.
TrueX or squished geometry, enjoy the even feel.

ANALOG AND DIGITAL CAPABLE 

20x20mm mounting holes in the rear allow for mounting of both analog and digital FPV video systems.

3D PRINT DESIGNS AND BUILD INFO:

  • https://www.thingiverse.com/piratframes/designs 

  • https://www.piratframes.com/wp-content/uploads/2022/03/SLOOP-V3-Notice.pdf 

Includes

  • 4 x 5mm Arm 5″
  • 1 x 2.5mm Bottom plate
  • 1 x 2.5mm Top plate
  • 2 x 1.5mm Camera plate
  • 1 x 2mm Cross plate
  • 1 x 3D Printed VTX Antenna Mount
  • 8 x 6061 Aluminum Custom washers
  • 4 x 28mm Custom standoffs in 7075 aluminum
  • 4 x 21mm Custom standoffs in 7075 aluminum
  • 4 x Custom design 5mm standoffs in 7075 aluminum
  • 8 x Black Hex Pressnuts
  • 8 x 8mm M3 Torx T10 12.9 steel countersunk screws
  • 8 x 12mm M3 Torx T10 12.9 steel countersunk screws
  • 4 x 10mm M3 Torx T10 12.9 steel gold colored mushroom head screws
  • 4 x 15mm M3 Torx T10 12.9 steel countersunk head screws
  • 2 x 20mm / 220mm lipo strap
  • 1 x Silicone grommet for battery cable
  • 1 x Silicone lipo pad
  • 4 x Foam landing pad
  • 1 x Torx T10 key

    Thông tin bổ sung

    Trọng lượng 100 kg

    Đánh giá

    Chưa có đánh giá nào.


    Chỉ những khách hàng đã đăng nhập và mua sản phẩm này mới có thể đưa ra đánh giá.