[PRE-ORDER] Immersion RC Tramp/Ghost Hybrid V2 UNO 5.8GHz vTx/2.4GHz Rx

product-image

[PRE-ORDER] Immersion RC Tramp/Ghost Hybrid V2 UNO 5.8GHz vTx/2.4GHz Rx

50.00

Out of stock

50.00

Availability: Hết hàng SKU: VTX-Orqa-42633654993072 Từ khóa: , , , , ,

Mô tả

There is nothing like the experience of flying an FPV drone, but building these marvelous machines is more complex than it needs to be. With Tramp, we set out to raise the bar on video transmitter technology. With Ghost, we set out to redefine the norms in receivers for R/C control. And now we have fused these two together, in the groundbreaking Ghost Hybrid. Designed by pilots, built by pilots, supported by pilots.

Check out all our IRC Ghost Products and the rest of our ImmersionRC Products!

Features: 

– 20×20/25.5×25.5 mounting
– single sided, with included gummies, for extremely low profile mounting
– Only 2.2g, perfect for the popular sub-250g class
– Extreme Range AND Low Latency
– 500Hz R/C Link Updates (HW is 1kHz ready)
– 2.4GHz Lora OR FLRC control modes, for the best performance in any environment
– Integrated 5.8GHz 25mW – 600mW Video Transmitter
– All 48 standard channels
– Thermally Regulated, Factory Calibrated

    INTELLIGENT VTX CONTROL

    Intelligent, and direct control of the video transmitter from the Ghost ecosystem. Use either the OLED menus on the Ghost Transmitter module or the responsive OpenTx tools menu. Tx remains silent on power-up, shuts down immediately in an (unlikely) failsafe.

    LOCKING CONNECTORS

    Innovative locking connectors deliver the advantages of the light-weight u.FL/MHF standard, with the security required for world-class racing, or long-range flying. Simply plug the connector onto the board, and slide the locking cap to secure.

    THERMAL REGULATION + CALIBRATION

    As with all tramp products, the Hybrid includes automatic thermal regulations, protecting the video transmitter against potentially damaging overheating while sitting on the starting pad. The on-board Tramp is factory calibrated, for precise power delivery during critical race events.

    qTee ANTENNAS

    qTee, a.k.a ‘Cutie’ antennas are center-fed dipoles, with integral balun to ensure no cable radiation, and without unexpected nulls in the radiation pattern. Tip to Tip length of just 60mm, easy to install in anything from a Whoop™ to an X-Class quad

    Specifications:

    • Downlink RF Power: +13dBm
    • Sensitivity: -117dBm in Long Range mode
    • Serial Formats: GHST, SBus, SBus-Fast (200k), SRXL-2 (400k), SBus Inverted
    • Firmware: Over-the-air (OTA) upgradeable (Rx and VTx)
    • Power Supply: 5V, with Over Voltage Protection
    • VTX Control: Automatic, via Ghost
    • Antenna Connectors: Standard U.FL with Locking Connectors

    Manual:

    Firmware/ Downloads:

    Package Includes:

    • 1x Immersion RC Tramp/Ghost Hybrid V2 UNO 5.8GHz vTx/2.4GHz Rx
    • 1x qTee Antenna
    • 1x Silicone Cables

    Thông tin bổ sung

    Trọng lượng 100 kg

    Đánh giá

    Chưa có đánh giá nào.


    Chỉ những khách hàng đã đăng nhập và mua sản phẩm này mới có thể đưa ra đánh giá.