Skystars F7HD Stack Flight Controller & KM50A 50A ESC – 30 x 30mm
- Mô tả
- Size Guide
- Thông tin bổ sung
- Đánh giá (0)
Skystars F7HD Stack with 30×30 F7 Flight Controller & KM50A 50A ESC! The flight controller Includes 6 UARTS, a 10V 3A Regulator for Caddx Vista or DJI Air Unit, and 8MB Blackbox! The flight controller also has convenient solder pads placed at each corner for easy wiring of LED’s. The KM50A ESC is stable for 6S voltages due to the use of lots of SMD capacitors and a large heatsink for heat dissipation and style. Flashed with the latest Blheli_32 firmware it also support telemetry functions (including voltage RPMS & current)!
For wiring and configuration diagrams click the link HERE!
Skystars F7HD Features:
- Designed the LED installation position in the four corners support WS2812 Programable LED.
- Supports serial receivers (SBUS, iBus, Spektrum, Crossfire, PPM).
- Support 3.3V Satellite Receiver.
- High-performance / low-noise / high sensitivity IMU.
- MPU6000 with 6-axis gyro and accelerometer.
- Includes a DJI HD cable in default
- Input voltage12V-26V (3-6S)
- Automatic voltage monitoring.
Skystars F7HD Specifications:
- MCU: STM32F722RGT6 216MHz
- IMU: MPU6000 (SPI)
- OSD: Betaflight OSD & DJI HD OSD (UART6)
- 6 hardware UARTS: (UART 1, 2, 3, 4, 6, 7)
- BEC: 5V@3A & 10V@3A
- Input Voltage: 3-6S Lipo
- Baro: No
- Blackbox: 8MB
- Firmware: SKYSTARS F7HD
- Dimensions: 38.5x40x6.2mm
- Mounting Holes: 30.5×30.5mm/M3
- Weight: 6.2g
Skystars KM55A ESC Features:
Flashed with the latest Blheli_32 firmware
Highly Efficient (Low Specific Heat Capacity) heatsink for better cooling
Use of Aluminum alloy for heatsink
MOSFET’s imported from the United States
Panasonic ZLH Ultra Low ESR Capacitor
PCB uses 3oz Copper which reduces heat and increase system efficiency
Large motor pads for easy soldering
Support telemetry functions: Voltage, RPMS, & Current, etc.
Inbuild overcurrent protection
Vibration isolation rubber to prevent cracks during crash
Supports custom ESC startup tone
Skystars KM55A ESC Specifications:
- Input voltage: 3-6S LiPo / LiHV
- Firmware: Blheli_32
- Continuous Current: 50A
- Peak Current: 60A (10S)
- Overcurrent Protection: Yes
- ESC Protocol: Dshot 600/1200
- Mounting Hole Pattern: 30.5×30.5mm / M3
- BEC: NO
- Product size: 41x46x7.6mm
- Weight: 17g
- 1 x Skystars F7HD 30.5×30.5mm Flight Controller
- 1 x SKYSTARS KM50A 32Bit 3-6S 30.5×30.5mm 4in1 ESC
- 4 x M3x20mm Screws
- 4 x M3x30mm Screws
- 4 x M3 Nylon Nuts
- 10 x Rubber Grommets
- 1 x XT60 Connector
- 1 x 8pin JST FC to ESC Cable
- 1 x 6pin JST FC to DJI Air Unit Cable
- 1 x 14AWG 10CM Battery Cable
- 1 x 35V 560uF Capacitor
Thông tin bổ sung
|Trọng lượng||100 kg|
Chỉ những khách hàng đã đăng nhập và mua sản phẩm này mới có thể đưa ra đánh giá.